Hazır

Orthotics and Prosthetics Centre Software

Windows software for orthotics and prosthetics centres: measurement form templates, work orders from casting to fitting with a workshop board, component serial numbers and warranties, material costs, option-based quote PDFs and review reminders for growing children.

Başlanğıc qiymət 450 US$ilk il Yeniləmə: 159 US$ / il
  • Quraşdırma daxildir
  • Texniki dəstək
  • Stripe ilə təhlükəsiz ödəniş
Ümumi baxış

Orthotics and prosthetics centre software follows every job on a single work order, from the patient’s measurements to the final fitting. Measurements taken for lower and upper limb prostheses, spinal braces, AFOs, KAFOs, hand splints or custom insoles go onto template forms along with photos. The work order moves through measurement, casting or scanning, modelling, check socket, fabrication, fitting and review, and the workshop board shows which job is with which technician and at which stage.

The difficulty in orthotics and prosthetics is that every job is a multi-step build spread over weeks. A fitting date slips, a component’s serial number goes missing, profit is unknown because material costs were never added up, and a growing child’s review is forgotten. The software dates every stage, shows what is running late, links components such as knee joints, feet and adaptors to the job by serial number, and reminds you when post-fitting reviews are due. We install it and import your patients from Excel remotely.

Who is it for?

  • Orthotics and prosthetics centres: centres that measure, fabricate and fit in their own workshop.
  • Prosthetic workshops: technician teams making lower and upper limb prostheses.
  • Orthopaedic product makers: businesses producing custom braces, splints and insoles.
  • Scoliosis brace centres: centres following children and young people over long periods.
  • Hospital orthotics and prosthetics units: units that want to track work orders and material use.

Key features for measurements, fabrication and warranties

Measurement form templates

You define a measurement template for each product type: residual limb length and circumferences for a below-knee prosthesis, trunk circumferences for a spinal brace, leg and foot measurements for an AFO. Measurements are kept with dates, photos and scan files. When the patient comes back, old and new measurements appear side by side and the change is calculated.

Staged work orders and a workshop board

Each work order is split into stages by product type, and each stage gets a responsible technician and a target date. The workshop board shows jobs in stage columns, and a job past its target date turns red. Fitting and handover appointments are linked to the work order, so you can see whether a stage is ready before the patient arrives.

Component serial numbers and warranties

Ready-made components such as knee joints, prosthetic feet, adaptors, locking systems and liners are linked to the job with their serial number, manufacturer and warranty period. If a component fails, you see straight away which patient has which serial-numbered part and whether it is still under warranty. Warranty claims sent to the manufacturer are followed until they come back.

Material costs and option-based quotes

Components and consumables used on each job are entered with their costs, so the real cost and profit of the job, including labour, are clear. For privately paying patients, you prepare a quote comparing the same product with different component options, for example two choices of foot and knee joint. The quote prints as a PDF, and the accepted option becomes the work order.

Review and renewal reminders

After handover, review appointments are planned according to the product type. For growing children, reminders for measurement checks come up at the interval you set, and patients nearing a socket change or device renewal appear on a separate list. The documents needed for a funder or medical report file are kept as a checklist on the work order.

Plan comparison

FeatureStarterProfessionalEnterprise
Computer licences13 (local network)10 (local network)
Measurement templates and staged work orders✓✓✓
Component serial numbers and warranty tracking✓✓✓
Review and renewal remindersListList and SMSList and SMS
Workshop board and technician assignment—✓✓
Material costs, profit reports and option-based quotes—✓✓
SMS per month—3001,000
Branches113
Cloud backup and phone reports screen——✓

The Starter plan is enough for centres where a few people handle measurement and fabrication from a single computer. Choose Professional if the workshop, measurement room and office use separate computers, and if you want to assign jobs to technicians, see costs and profit and prepare option-based quotes for privately paying patients. Enterprise suits businesses with more than one branch or with fabrication in a central workshop.

How do you get started?

  1. Choose a plan: pick the plan that fits your number of computers and branches, and place your order.
  2. Remote setup: we install the software on your computers remotely and set up the local network connection.
  3. Data import: we import your patient list, open jobs and component stock from Excel.
  4. Training: we set up your product types, measurement templates and job stages with you and give your team a short remote training session.

Infrastructure, security and support

The software runs on Windows 10 / 11 and patient data is kept on your centre’s computer. An automatic local backup is taken every day, and on the Enterprise plan the backup is also sent to the cloud. Each user has their own password and permissions; prices, costs and deleting patients are limited to authorised users, and the software logs who viewed health information. Technical support lasts 3, 6 or 12 months depending on the plan; in later years, the yearly update and support fee keeps new versions and support coming.

The orthotics and prosthetics centre software runs on Windows 10 / 11 computers and keeps its data on your centre’s computer. Remote setup and Excel data import are included; computers, printers, scanners and network hardware are not. SGK / MEDULA, ÜTS, e-invoicing and 3D scanner or CAD software connections are not included and can be added through custom development. Sending beyond the monthly SMS allowance is not included.

  • Sürətli təhvil

    Hazır məhsul bazamız sayəsində layihəniz qısa müddətdə istifadəyə verilir.

  • Təhlükəsizlik birinci yerdə

    Təhlükəsiz kodlaşdırma standartları, şifrələnmiş bağlantılar və müntəzəm yeniləmələr.

  • Fasiləsiz dəstək

    İstifadəyə verildikdən sonra texniki xidmət, yeniləmələr və texniki dəstək. Həmişə yanınızdayıq.

Hazır

Elə bu gün başlayın

Paket seçin, domeninizi müəyyən edin və sifarişinizi bir neçə dəqiqəyə tamamlayın.

  • Quraşdırma daxildir
  • Texniki dəstək
  • Stripe ilə təhlükəsiz ödəniş

Başlanğıc qiymət450 US$ilk il

Yeniləmə: 159 US$ / il

İndi danışmaq istəyirsiniz?
Əsas xüsusiyyətlər

Ehtiyacınız olan hər şey hazırdır

  • Measurement templates: fields by product type, photos and scan files, old and new comparisons

  • Staged work orders: measurement, casting / scanning, modelling, check socket, fabrication, fitting, review

  • Component serials and warranties: knee joints, feet, adaptors, liners; warranty claim tracking

  • Measurement check reminders for growing children and socket / device renewal reminders

  • Workshop board: stage columns, responsible technician and late job alerts (depending on the plan)

  • Material and labour costs with profit reports per job (depending on the plan)

  • Option-based quote PDFs: component options side by side, accepted one becomes the job (depending on the plan)

  • A calendar of fitting and handover appointments linked to work orders

  • A document checklist for medical report and funder files

  • Component and consumables stock with low-stock alerts (depending on the plan)

  • Payments, instalments and patient balances

  • Review and renewal SMS (depending on the plan)

  • 3 or 10 networked computers, branches, cloud backup and a phone reports screen (depending on the plan)

  • Remote setup, Excel import of patients and jobs, automatic local backup

Paketlər və qiymətlər

Biznesiniz üçün uyğun paketi seçin

Sizə uyğun paketi seçin və sifarişinizi bir neçə addımda tamamlayın.

Starter

450 US$
ilk il
Yeniləmə haqqı2-ci ildən etibarən hər il 159 US$ / il
  • 1 computer licence (Windows 10 / 11)
  • Patient records and measurement templates with photo and scan attachments
  • Staged work orders with target date tracking
  • Fitting and handover appointment calendar
  • Component serial numbers, warranty periods and warranty claim tracking
  • Review and renewal reminder list (including children)
  • Document checklist for medical report and funder files
  • Payments, instalments and patient balances
  • Remote setup, Excel import of patients and jobs, automatic local backup
  • 3 months of technical support
Sifariş verin

Enterprise

1.500 US$
ilk il
Yeniləmə haqqı2-ci ildən etibarən hər il 529 US$ / il
  • Licences for up to 10 computers, shared data over your local network
  • Multiple branches: up to 3, with separate calendars and tills and shared patient records
  • Central workshop: follow work orders from every branch on one board
  • Job, lead time and profit reports comparing branches and technicians
  • 1,000 SMS per month
  • Daily cloud backup
  • Reports screen for your phone (web): open jobs, late stages and payments
  • 12 months of priority technical support
Sifariş verin
  • Ödənişlər 256-bit SSL ilə qorunur, kart məlumatlarınız saytımızda saxlanılmır.
Suallar

Tez-tez verilən suallar

Bu mövzuda ən çox verilən suallar. Sualınızı tapmasanız, bizə yazın.

Bizə sual verin
Are SGK authorisation and invoicing handled in the software?

No, SGK / MEDULA and e-invoicing connections are not included. The work order holds the report date, report number and required documents as a checklist, and it shows a warning if a document is missing. A connection to these systems can be added through custom development if you need it.

Does it work with 3D scanners and CAD files?

The software does not connect directly to scanners or CAD software. You can upload and store scan and model files as attachments on the work order and note which file was used at which stage. A connection to a specific scanner software can be added through custom development.

Can we build our own measurement templates?

Yes. You define the measurement fields, units and order for each product type, and you can add an explanatory image to the template. During setup we prepare templates with you for the product types you use most.

How are option-based quotes prepared?

On the Professional and Enterprise plans, you enter two or three component options for the same job; each option’s components, labour and total appear in their own column. The quote prints as a PDF with your logo. When the patient accepts an option, it becomes the work order with its components.

Can I use it on more than one computer?

The Starter plan is for one computer. On Professional, 3 computers share the same data over your local network, and on Enterprise up to 10, for example the measurement room, workshop and office. Enterprise also adds 3 branches, a daily cloud backup and a reports screen you can check on your phone.

What do I pay from the second year?

The licence does not expire. From the second year a yearly update and support fee applies, lower than the first-year price. If you do not renew it, the software keeps working on its latest version, but you will not receive new versions or technical support.

Məhsullar

Digər hazır məhsullarımız

Sınanmış platforma, quraşdırma daxil qiymət və yayımdan sonra dəstəklə dərhal istifadə edə biləcəyiniz digər həllər.

Hamısı