Siap pakai

CCTV Design Calculator Extension

A Chrome extension for CCTV and alarm technicians: storage and recording time, lens and field of view, pixel density, PoE power budget, battery standby and voltage drop calculations, plus right-click price notes from distributor pages and quote summaries.

Mulai dari US$39sekali bayar
  • Termasuk penyiapan
  • Dukungan teknis
  • Pembayaran aman dengan Stripe
Ikhtisar

The CCTV design calculator extension replaces the spreadsheets, scraps of paper and open tabs you use when preparing surveys and quotes with one tool in Chrome’s side panel. You enter the number of cameras, resolution and days of recording, and the storage needed comes out; you can also see how many days of recording the drive you already have will hold. When choosing a lens, you work out how wide the scene will be at a given distance and how many pixels fall on each metre.

Whether the switch’s PoE budget is enough for the cameras, how many amp-hours of battery the alarm panel needs and how far the voltage will drop over a long cable on a 12-volt line are worked out in the same panel. When you select a price on a distributor site and right-click, it is added to your project’s materials notes along with the page address and date. At the end, the calculation results and materials list become a tidy summary ready to send to the customer.

Who is it for?

  • CCTV installation technicians: Technicians who want to do storage, lens and power calculations quickly after a survey.
  • Office staff preparing quotes: People collecting prices from distributor sites and preparing quote summaries.
  • Alarm system installers: Dealers choosing batteries based on panel and siren consumption.
  • Electronic security project teams: Teams that want to use the same calculation method with shared device profiles.

Calculators that help at the survey desk

Storage and recording time

You enter cameras in groups: quantity, resolution, compression type, frame rate and recording type. The data rate per camera comes from profiles you save for the devices you use. For motion recording you set the average motion rate. The extension shows the storage needed for the days required, or how many days of recording the drive you have will hold.

Lens, field of view and pixel density

The horizontal field of view is worked out from the sensor size and focal length. When you enter the target distance, the scene width at that distance and the number of pixels per metre come out. You define your own pixel thresholds for observation, recognition and identification, and the result is shown with a coloured label against those thresholds.

PoE budget, battery standby and voltage drop

The power the cameras draw with infrared on is added up against the switch’s total PoE budget, showing the remaining headroom and a warning if it is exceeded. From the alarm panel’s standby and alarm current, the battery capacity needed for the standby time you want is worked out. On 12-volt lines, the voltage drop is worked out from the cable cross-section, length and current, and the voltage reaching the camera is shown.

Right-click price notes and quote summaries

When you select a price or product name on a distributor site and right-click, the selected text, page address and date are added to the project’s materials notes, and you adjust the amount and quantity in the panel. At the end of the project, the calculation results and materials list become a tidy text in one click, ready to paste into WhatsApp or an email.

Plan comparison

FeatureStarterProfessionalEnterprise
Users and projects1 user, 30 projects5 users, 500 projects20 users, 3,000 projects
Storage, lens, PoE, battery and voltage calculations✓✓✓
Right-click price notes and summary text✓✓✓
Your own device profiles20 profilesUnlimited, shared with the teamUnlimited, shared with the team
PDF calculation report for the customer—✓✓ (with your logo)
Permissions and change history——✓
Support (12 months)Email / WhatsAppEmail / WhatsAppPriority

Starter is enough for a single technician or small business owner who does their own calculations. Firms that want their quote and field teams to use the same device profiles and give customers a PDF calculation report choose Professional. Enterprise suits firms with large project teams that want to manage profile and template changes through permissions.

How do you get started?

  1. Choose a plan: Pick the plan that suits your number of users and pay once; your account is opened in the ADK panel.
  2. Install the extension: Add the extension from the Chrome Web Store and sign in with your account.
  3. Enter your profiles: Save the data rate and power consumption of the cameras you use as device profiles.
  4. Open your first project: Open a project under the customer’s name, run the calculations, add price notes and copy the summary text.

Infrastructure, security and support

The extension is built with Manifest V3 and published on the Chrome Web Store under the ADK account. It uses only the side panel, storage, context menu and clipboard write permissions; it does not read the content of the pages you open, click on your behalf or collect data. The context menu takes only the text you select and save, together with the page address. Projects and profiles are stored in your account in the ADK panel over an encrypted connection and backed up every day. Payment is one-time and gives you a lifetime licence; updates for Chrome’s mandatory changes are included for life, and new versions and email / WhatsApp support for 12 months.

The CCTV design calculator extension is bought with a one-time payment and comes with a lifetime licence. ADK Yazılım publishes the extension on the Chrome Web Store under its account; it runs in Chrome on a computer, and your data is stored in your account in the ADK panel and backed up every day. The extension does not read page content, scrape prices or automate anything; you select and save price notes yourself. Calculations give approximate results from the device values you enter and do not replace manufacturer documentation or project specifications. Distributor price list integration, transfer to quote and stock software and links to drawing software can be added through custom development. Payment is one-time and gives you a lifetime licence; updates for Chrome’s mandatory changes are included for life, and new versions and email / WhatsApp support for 12 months.

  • Pengiriman cepat

    Fondasi produk siap pakai kami membuat proyek Anda cepat tayang.

  • Keamanan nomor satu

    Standar pengodean yang aman, koneksi terenkripsi, dan pembaruan rutin.

  • Dukungan berkelanjutan

    Pemeliharaan, pembaruan, dan dukungan teknis setelah peluncuran. Kami selalu mendampingi Anda.

Siap pakai

Mulai hari ini

Pilih paket, tentukan domain, dan selesaikan pesanan Anda dalam hitungan menit.

  • Termasuk penyiapan
  • Dukungan teknis
  • Pembayaran aman dengan Stripe

Mulai dariUS$39sekali bayar

Ingin bicara sekarang?
Fitur utama

Semua yang Anda butuhkan, siap digunakan

  • Storage and recording time: storage needed, or days held by an existing drive, from camera groups and profiles

  • Lens and field of view: horizontal angle from sensor and focal length, and scene width at distance

  • Pixel density: pixels per metre against your own observation, recognition and identification thresholds

  • Right-click price notes: selected text, page address and date added to the project’s materials notes

  • PoE power budget: consumption with infrared on, remaining headroom and an overload warning

  • Alarm panel battery sizing: battery capacity needed from standby and alarm current

  • Voltage drop on 12-volt lines: voltage reaching the camera from cable size, length and current

  • Project records by customer, with calculation history

  • One-click quote summary text: results and materials list copied to the clipboard

  • Your own device profiles: data rate and power draw; shared team profiles (depending on the plan)

  • PDF calculation report for the customer; with your logo (depending on the plan)

  • Permissions, change history and Excel export (depending on the plan)

  • Chrome side panel and ADK web panel; data in your account, backed up daily

  • Manifest V3; only side panel, storage, context menu and clipboard write permissions

Paket dan harga

Pilih paket yang tepat untuk bisnis Anda

Pilih paket yang sesuai dan selesaikan pesanan Anda dalam beberapa langkah.

Starter

US$39
sekali bayar
  • One-time payment, lifetime licence: 1 user
  • 30 projects
  • Chrome side panel and ADK web panel
  • Storage and recording time calculations; 20 device profiles
  • Lens, field of view and pixel density; your own thresholds
  • PoE power budget, alarm panel battery sizing and voltage drop
  • Right-click price notes: selected text, page address and date
  • One-click quote summary text copied to the clipboard
  • Automatic daily cloud backups
  • 12 months of new versions and support
Pesan sekarang

Enterprise

US$229
sekali bayar
  • One-time payment, lifetime licence: 20 users
  • 3,000 projects
  • PDF calculation report with your company logo
  • Permissions: editing profiles, thresholds and templates are separate permissions
  • Change history: which user changed what and when
  • Project groups by customer and user
  • Report and summary templates in Turkish and English
  • Excel export: projects, calculation results and materials notes
  • 12 months of priority support
Pesan sekarang
  • Pembayaran dilindungi SSL 256-bit; detail kartu Anda tidak pernah disimpan di situs kami.
FAQ

Pertanyaan yang sering diajukan

Pertanyaan yang paling sering diajukan tentang topik ini. Jika pertanyaan Anda tidak ada, hubungi kami.

Tanyakan kepada kami
Where do the data rates in the storage calculation come from?

The data rate per camera comes from the device profiles you save. You enter each profile with its resolution, compression type and frame rate, using the technical details of the camera or recorder you use or values you have measured yourself. For motion recording the result depends on the average motion rate you set, and the calculation is an approximate figure.

Which permissions does the extension ask for?

The extension uses only the side panel, storage, context menu and clipboard write permissions. It does not read the content of the pages you open, click on pages for you, fill in forms or collect data in the background. The context menu saves only the text you select and the address of that page.

Does it pull prices from distributor sites automatically?

No. The extension does not scrape prices or scan pages. When you select a price or product name and right-click, only that text, with the page address and date, is added to your project’s materials notes. You correct the amount and quantity yourself in the panel, and you need to confirm that prices are current with your distributor.

How do I set the pixel density thresholds?

In the settings you enter your own pixels-per-metre thresholds for levels such as observation, recognition and identification, using the values in your company’s or the project’s specification. In the lens calculation, the result is shown with a coloured label against these thresholds. You can change the thresholds for each project.

How do I send the results to the customer?

On every plan, the calculation results and materials list become a tidy text in one click, ready to paste into WhatsApp or an email. On the Professional plan a PDF calculation report can be downloaded for the customer, and on the Enterprise plan this report carries your company logo. The extension does not send messages for you.

Does the extension work on a phone or in other browsers?

The extension runs in the Chrome browser on a computer; some Chromium-based browsers support Chrome Web Store extensions, but it is built officially for Chrome. Because your projects are stored in your account in the ADK panel, you can reach the same projects from your office and home computers.

Can our team share device profiles?

On the Professional and Enterprise plans, device profiles, thresholds and summary text templates are shared across the team, so quote and field staff calculate with the same values. On the Enterprise plan, editing profiles and templates is a separate permission, and the history shows which user changed what and when.

Is it a one-time payment?

Yes. You pay for the package once, with no recurring fee, and receive a lifetime licence for the number of users in the package. Updates for Chrome’s mandatory changes are included for life, and new versions and email / WhatsApp support for 12 months (priority on the Enterprise plan). After 12 months the extension and your data keep working. To add users, you move up to a higher package by paying the difference.

Produk

Produk siap pakai lainnya

Solusi lain yang bisa langsung Anda gunakan, dengan platform teruji, instalasi termasuk, dan dukungan setelah peluncuran.

Semua