成品软件

Land-for-Flats Deal Calculator Software

Land-for-flats calculator software for agents who handle building plots: work out buildable area and number of flats from zoning data, share flats by floor and aspect value, and compare developers’ offers side by side for the landowner.

起价 US$9/ 月
  • 包含安装配置
  • 技术支持
  • Stripe 安全支付
概览

Land-for-flats calculator software is the early feasibility desk for an estate agent who brings landowners and developers together. In a land-for-flats deal, common in Turkey, the landowner gives the plot to a developer in exchange for a share of the finished flats. You enter the plot area, the floor area ratio, the site coverage ratio, the number of storeys and any land to be given up for roads or parks; the software works out the buildable area, the likely number of flats for the flat types you choose and the landowner’s share at the agreed ratio. Work that used to take hours with paper and a calculator is done in minutes, with a tidy report.

The software shares flats by value as well as by number. You give coefficients for the ground floor, middle floors, the top floor, front and rear aspects, and the sharing table shows that both sides receive a balanced share in value terms. Developers’ offers sit side by side under ratio, completion time, rent support, advance payment and guarantee, so you can give the landowner a clear comparison.

Who is it for?

  • Land agents: Agents who want to give landowners and developers a quick early calculation on land-for-flats deals.
  • Urban regeneration advisers: Advisers who must explain shares clearly on plots with several owners.
  • Estate agency offices: Offices with land listings that want the same report format for every offer.
  • Small and mid-sized developers: Builders who want to see the balance between ratio and cost before bidding for a plot.
  • Agents acting for landowners: Agents who want to compare incoming offers in a neutral table.

Features that put land negotiations on a calculated footing

Buildable area and number of flats from zoning data

Land to be given up is deducted from the plot area, and the remaining net plot is multiplied by the floor area ratio and the site coverage ratio. You enter the share of area excluded from the ratio, any basement floors and the net-to-gross factor. When you choose flat types (one-bedroom, two-bedroom, three-bedroom, shop) and their average size, the software works out the likely number of flats and how they spread across floors. You keep scenarios with different ratios or flat mixes side by side.

Sharing table weighted by floor and aspect

Each flat is given a floor and aspect coefficient, and the software shares the flats between the landowner and the developer in the value balance closest to the agreed ratio. The table shows each side’s number of flats, total floor area and weighted value. When you change the allocation by hand, the difference from the ratio is recalculated straight away.

Shares for co-owners of a plot

On the Professional and Enterprise plans, when a plot belongs to several people you enter their ownership shares. The landowners’ share is divided among them; for fractions that do not add up to a whole flat, the balancing payment between co-owners is worked out from the value per square metre you enter. In the meeting everyone sees their own share in the same table.

Developer cost and a reasonable ratio range

You enter the build cost per square metre, design and permit costs and the developer’s expected margin. The software shows the estimated total cost, the sale values of the flats and, on those assumptions, the range of land-for-flats ratios that looks reasonable from the developer’s side. You can discuss the gap between the landowner’s hopes and the developer’s sums in concrete terms.

Offer comparison and PDF report

You enter each developer’s offer under ratio, completion time, rent support, advance payment, guarantee and late completion penalty. The software shows the offers side by side in one table and prepares a PDF report with your office logo that you can hand to the landowner.

Plan comparison

FeatureStarterProfessionalEnterprise
Users1310
Active plot files1050Unlimited
Buildable area, number of flats and scenarios✓✓✓
Sharing table weighted by floor and aspect✓✓✓
Offer comparison3 offersUnlimitedUnlimited
Co-owner shares and balancing payments—✓✓
Developer cost and reasonable ratio range—✓✓
Corporate report template and Excel export——✓
SupportEmail / WhatsAppEmail / WhatsAppPriority

Starter suits an independent agent who takes on the occasional land-for-flats deal. Offices that work with co-owned plots and regeneration projects and negotiate with developers on cost choose Professional. Enterprise is the right fit for offices and developers running many plot files who want to present reports in their own corporate template.

How do you get started?

  1. Choose a plan: Pick the plan that fits your number of users and plot files, paid monthly or yearly.
  2. Set your defaults: Adjust the excluded area share, net-to-gross factor and floor and aspect coefficients for your area.
  3. Open your first plot: Enter the values from the zoning certificate and see the buildable area and number of flats.
  4. Share the report: Send the sharing table and offer comparison to the landowner as a PDF.

Infrastructure, security and support

The software is a web application that runs in the browser, works on phones and tablets too, and is hosted on ADK infrastructure. Each user signs in with their own password; plot files are visible only to the agent who opened them and to the manager. Connections are encrypted and data is backed up every day. We provide email and WhatsApp support for the length of your subscription; on the Enterprise plan support is given priority.

The land-for-flats calculator is a monthly cloud service; it runs in the browser, so no installation, server or domain is needed. Data is stored on ADK infrastructure and backed up every day. Calculations are an early feasibility estimate based on the zoning values, coefficients and cost assumptions you enter; the zoning certificate, approved architectural design and building permit are what count. The software does not draft contracts and does not give legal or technical advice. Connections to e-zoning, municipal and land registry systems are not included and can be added through custom development. You can pay monthly or yearly (12 months of use for the price of 10).

  • 快速交付

    依托成熟的产品基础,让您的项目迅速上线。

  • 安全优先

    安全编码规范、加密连接和定期更新。

  • 持续支持

    上线后提供维护、更新和技术支持,我们始终在您身边。

成品软件

今天就开始

选择套餐,挑选域名,几分钟即可完成下单。

  • 包含安装配置
  • 技术支持
  • Stripe 安全支付

起价US$9/ 月

想立即沟通?
主要功能

所需功能,一应俱全

  • Buildable area from zoning data: land given up, floor area ratio, site coverage, storeys and net-to-gross factor

  • Sharing table weighted by floor and aspect: flats balanced by value, not just by number

  • Co-owner shares and balancing payments for fractional shares (depending on the plan)

  • Developer cost, sale value and a ratio range that is reasonable for the developer (depending on the plan)

  • Likely number of flats and floor layout for your chosen flat mix

  • Landowner and developer shares at the agreed ratio: flats, floor area and value

  • Scenarios for the same plot with different ratios and flat mixes

  • Instant recalculation of the ratio difference when you change the allocation by hand

  • Developer offer comparison: ratio, completion time, rent support, advance, guarantee, penalty

  • PDF report with your office logo: calculation summary, sharing table and offer comparison

  • Default coefficients adjusted for your area

  • Corporate report template and Excel export (depending on the plan)

  • Works in the browser, on phones and tablets, with encrypted connections and daily backups

套餐与价格

为您的业务选择合适的套餐

选择合适的套餐,几步即可完成下单。

Starter

US$9
首月
续费第 2 个月起每月 US$9 / 月
  • 1 user, 10 active plot files
  • Net plot, buildable area and excluded area calculations from zoning data
  • Likely number of flats and floor layout for your flat mix
  • Landowner and developer shares at the agreed ratio
  • Sharing table weighted by floor and aspect, recalculated instantly after manual changes
  • Scenarios per plot and comparison of up to 3 offers
  • PDF report with your office logo
  • Browser-based working, encrypted connections and daily backups
  • Email / WhatsApp support for the length of your subscription
立即下单

Enterprise

US$39
首月
续费第 2 个月起每月 US$39 / 月
  • Everything in Professional, 10 users, unlimited plot files
  • A PDF report template designed to your corporate identity
  • Excel export of calculations, sharing tables and offers
  • Manager access to every agent’s plot files
  • Different default coefficient sets for each area
  • Plot file status: in talks, collecting offers, agreed, dropped
  • Priority email / WhatsApp support for the length of your subscription
立即下单

Starter

US$90
首年
续费第 2 年起每年 US$90 / 年
  • Yearly billing: 12 months of use for the price of 10
  • 1 user, 10 active plot files
  • Net plot, buildable area and excluded area calculations from zoning data
  • Likely number of flats and floor layout for your flat mix
  • Landowner and developer shares at the agreed ratio
  • Sharing table weighted by floor and aspect, recalculated instantly after manual changes
  • Scenarios per plot and comparison of up to 3 offers
  • PDF report with your office logo
  • Browser-based working, encrypted connections and daily backups
  • Email / WhatsApp support for the length of your subscription
立即下单

Enterprise

US$390
首年
续费第 2 年起每年 US$390 / 年
  • Yearly billing: 12 months of use for the price of 10
  • Everything in Professional, 10 users, unlimited plot files
  • A PDF report template designed to your corporate identity
  • Excel export of calculations, sharing tables and offers
  • Manager access to every agent’s plot files
  • Different default coefficient sets for each area
  • Plot file status: in talks, collecting offers, agreed, dropped
  • Priority email / WhatsApp support for the length of your subscription
立即下单
  • 付款采用 256 位 SSL 加密保护,我们的网站绝不存储您的银行卡信息。
常见问题

常见问题

关于此主题最常见的问题。如未找到答案,欢迎联系我们。

向我们咨询
Is the buildable area the software works out final?

No. The calculation is an early feasibility estimate based on the zoning values, excluded area share, net-to-gross factor and flat types you enter. The final buildable area is set by the municipality’s zoning certificate, plan notes and the approved architectural design. The report lists these assumptions clearly.

What are floor and aspect coefficients for?

Two flats of the same size can be worth different amounts because of their floor and aspect. When you give each flat a coefficient, the software balances the sharing by value rather than by number of flats alone. You set the coefficients for your area and can change the defaults in the settings.

How are shares divided on a co-owned plot?

On the Professional and Enterprise plans you enter each co-owner’s share. The flats due to the landowners are divided by these shares; for shares that do not make a whole flat, the balancing payment between co-owners is worked out from the value per square metre you enter. The result is a suggestion that becomes final when the co-owners agree.

How is the reasonable ratio range for the developer worked out?

You enter the build cost per square metre, design and permit costs, the developer’s margin and the estimated sale value of the flats. On those assumptions the software shows the range of land-for-flats ratios that covers the developer’s cost and margin. As the assumptions change, so does the range.

Can I draft the land-for-flats contract in the software?

No. The software does not draft contracts; it provides a calculation summary, sharing table and offer comparison as a report. In Turkey, land-for-flats construction contracts are drawn up before a notary, and we recommend asking your lawyer for help with the wording.

Does the software look up zoning data itself?

No. You enter details such as the floor area ratio, site coverage, number of storeys and land to be given up from the zoning certificate issued by the municipality. Connections to e-zoning and municipal systems are not included and can be added through custom development.

What is the difference between monthly and yearly payment?

Monthly payment renews each month and you can stop whenever you like. With yearly payment you pay the price of 10 months for 12 months of use. The features are the same either way; you can move up to a higher plan during the term and your plot files stay as they are.

产品

更多现成产品

其他可立即使用的方案:成熟平台、价格含部署、上线后提供支持。

全部