Listo para usar

Medical Laboratory Management Software

Windows laboratory management software for medical laboratories: patient registration and barcodes, reference ranges by age and sex, bulk results from analyser exports, delta checks, critical value call logs, quality control with Westgard rules and organisation accounts.

Desde 459 €primer año Renovación: 159 € / año
  • Instalación incluida
  • Soporte técnico
  • Pago seguro con Stripe
Descripción general

Laboratory management software runs your laboratory’s daily work, from patient registration to the signed report, on your Windows computers. At registration the patient and the tests requested are entered and barcode labels are printed, and worklists are prepared by section and analyser. Results are entered by hand or from the file an analyser exports, assessed against the reference range for the patient’s age and sex, approved, and printed or sent as a PDF.

The software does more than store results: it questions them before approval. A value that differs unexpectedly from the patient’s previous result is caught by the delta check, and for critical values the record shows who was told and when. The day’s control measurements are checked against Westgard rules, and if a rule is broken, approval of patient results stops. Your data stays on your laboratory computers, and we install the software remotely.

Who is it for?

  • Private medical laboratories: Laboratories running biochemistry, hormone, haematology and serology tests that want to leave paper and spreadsheets behind.
  • Polyclinic and medical centre laboratories: Units testing for their own patients and partner organisations.
  • Microbiology and serology laboratories: Laboratories following long-running tests and samples sent to external laboratories.
  • Laboratories working with organisations: Laboratories serving private practices, occupational doctors and companies at agreed prices.
  • New laboratories: Laboratories that want proper quality control records and reporting from the start.

Laboratory software that checks before you approve

Patient registration, barcodes and worklists

At registration you search for the patient or add a new record, then choose tests one by one or from a ready panel. The software prints a separate barcode label for each sample type and shows the results date on the patient slip. Worklists are prepared by section and analyser, so technicians can see which tube goes to which analyser.

Reference ranges by age and sex

For each test you set separate lower and upper limits by age group and sex, so ranges for children, adults and pregnancy never get mixed up. Each result is flagged high or low against the right range, and the report shows the range that applies to the patient. When a range changes, earlier reports keep the value that applied on the day.

Delta checks and critical value call logs

If the difference between a patient’s new result and their previous one exceeds the limit you set for the test, the result is flagged before approval, which helps catch sample mix-ups and faulty measurements. For critical values the software raises an alert and will not allow approval until it records who was told, at what time and by whom.

Internal quality control with Westgard rules

Control material measurements are entered for each test and level, and the software draws a Levey-Jennings chart from the mean and standard deviation. When a Westgard rule such as 1-3s, 2-2s or R-4s is broken, it raises a warning and stops approval of patient results for that test. A corrective action note is recorded, and a monthly quality control report can be printed.

Organisation price lists and accounts

You set a separate price list for each partner organisation, and the amount is worked out as soon as the organisation is chosen at registration. The patient’s payment goes to the daily till and the organisation’s share to its account. At the end of the month a patient and test breakdown and a statement are ready for each organisation.

Plan comparison

FeatureStarterProfessionalEnterprise
Computers13 (local network)10
Registration, barcodes, reference ranges and reports✓✓✓
Bulk results from analyser exports and worklists—✓✓
Delta checks and critical value call logs—✓✓
Internal quality control with Westgard rules—✓✓
Organisation price lists, accounts and monthly statements—✓✓
Kit and reagent stock, external laboratory tracking——✓
Daily cloud backup and a reports screen for your phone——✓
Technical support3 months6 months12 months

Starter is for small laboratories working on one computer that want orderly registration, barcodes and reports. Laboratories with several analysers and technicians that keep quality control records and work with organisations choose Professional. Enterprise suits laboratories with many computers, reagent stock and tests sent to external laboratories, whose managers want to follow things remotely.

How do you get started?

  1. Choose a plan: Pick the licence for the number of computers you use.
  2. Send your test list: Tests, panels, units, reference ranges, critical limits and price lists arrive in Excel.
  3. Remote setup: We install the software on your computers, import your data and prepare the report template with your logo.
  4. Get your team started: Open reception, technician and specialist users and register your first patients.

Infrastructure, security and support

The software runs on Windows 10 / 11 computers, data is kept on your laboratory computers and an automatic local backup is taken every day; on Enterprise the backup is also sent to the cloud. Registration, result entry, technical approval and specialist approval permissions are separate. When an approved result is changed, the old value, the user who changed it and the time stay on record.

The laboratory management software runs on Windows 10 / 11 computers and keeps its data on your laboratory computers. Remote setup and Excel data import are included; barcode printers, labels, barcode scanners and printers are not. Reference ranges, critical limits and quality control targets are the values your laboratory sets. Two-way analyser connections (ASTM / HL7 interfaces), e-Nabız, SGK Medula and e-invoicing are not included and can be added through custom development. Sending beyond the monthly SMS allowance is not included.

  • Entrega rápida

    Nuestras bases de producto ya desarrolladas ponen su proyecto en marcha en poco tiempo.

  • La seguridad, primero

    Estándares de programación segura, conexiones cifradas y actualizaciones periódicas.

  • Soporte continuo

    Mantenimiento, actualizaciones y soporte técnico tras el lanzamiento. Seguimos a su lado.

Listo para usar

Empiece hoy mismo

Elija un plan, escoja su dominio y complete su pedido en pocos minutos.

  • Instalación incluida
  • Soporte técnico
  • Pago seguro con Stripe

Desde459 €primer año

Renovación: 159 € / año

¿Prefiere hablar ahora?
Funciones principales

Todo lo que necesita, listo para usar

  • Delta checks: results that differ from the previous one beyond your limit are flagged (depending on the plan)

  • Critical value call logs: who was told, when and by whom; no approval without it (depending on the plan)

  • Westgard rule quality control, Levey-Jennings charts and approval stops on failures (depending on the plan)

  • Reference ranges by age group and sex, with high / low flags

  • Patient registration, test and panel selection, barcode labels by sample type

  • Worklists by section and analyser (depending on the plan)

  • Bulk result import from analyser Excel or CSV exports, matched by barcode (depending on the plan)

  • Technical and specialist approval; printed reports with your logo and PDF email

  • Price lists by organisation, organisation accounts and monthly breakdowns (depending on the plan)

  • Daily till and payments; “Results ready” SMS (depending on the plan)

  • Kit and reagent stock with expiry alerts; external laboratory tracking (depending on the plan)

  • Turnaround time and daily test count reports

  • 3 or 10 networked computers, daily cloud backup and a phone reports screen (depending on the plan)

  • Remote setup, Excel import of tests and patients, automatic local backup

Planes y precios

Elija el plan adecuado para su negocio

Elija el plan que mejor se adapte a usted y complete su pedido en pocos pasos.

Starter

459 €
primer año
Tarifa de renovaciónCada año a partir del 2.º año 159 € / año
  • 1 computer licence
  • Patient registration, test and panel selection, patient slip
  • Barcode labels by sample type
  • Tests, panels and units; reference ranges by age and sex
  • Manual result entry, high / low flags and approval
  • Printed reports with your logo and PDF email
  • Daily till and payments
  • Remote setup, Excel data import and automatic local backup
  • 3 months of technical support
Pedir ahora

Enterprise

1.609 €
primer año
Tarifa de renovaciónCada año a partir del 2.º año 559 € / año
  • Everything in Professional, up to 10 computers
  • Kit and reagent stock with lot and expiry alerts
  • Tracking of tests sent to external laboratories, with results added to the report
  • Turnaround time report by test and section
  • 1,500 SMS per month
  • Daily cloud backup
  • A reports screen for your phone (web): daily tests, pending results, revenue
  • 12 months of technical support
Pedir ahora
  • Los pagos están protegidos con cifrado SSL de 256 bits; los datos de su tarjeta nunca se almacenan en nuestro sitio.
Preguntas frecuentes

Preguntas frecuentes

Las preguntas más frecuentes sobre este tema. Si no encuentra la suya, escríbanos.

Consúltenos
How do results from our analysers reach the software?

On Starter, results are entered by hand. On Professional and Enterprise you choose the results file the analyser exports as Excel or CSV; results are written to the right patient by barcode and wait for approval. A direct two-way analyser connection is not included and can be added through custom development, depending on the analyser.

How do the Westgard rules work?

You enter the target mean and standard deviation for each test and control level. When the day’s control measurements are entered, the software updates the Levey-Jennings chart and checks rules such as 1-2s, 1-3s, 2-2s and R-4s. If a rejection rule is broken, approval of patient results for that test stops until a corrective action is recorded.

Who sets the delta check limits?

Your laboratory sets the limits for each test, as a percentage or an absolute difference, and chooses how far back to compare. A result over the limit is flagged on the approval screen; the specialist can approve it with a comment or ask for the sample to be repeated.

Where is the data kept?

Data is kept on your laboratory computer or on the main computer on your local network, with an automatic local backup every day. On Enterprise the backup is also sent to the cloud and summary reports can be viewed on a phone. Patient data is not run on our servers.

Can patients get their results online?

The software prints reports and sends them as PDFs by email. For patients to look up results online, you can upload these PDFs to our Laboratory Website and Test Results Portal. Automatic transfer between the two products is not included and can be added through custom development.

What happens if we do not pay for updates?

From the second year, the yearly update and support fee is lower than the first-year licence. If it is not paid, the software keeps working on its last version and your data stays in place, but new versions and technical support stop. You can renew at any time and move to the current version.

Can you move data from our old software?

Yes. Patient, test, price and organisation lists that can be exported from your old software as Excel or CSV are imported at setup. Moving past results depends on the file structure; we review a sample file and tell you what can be moved before setup.

Productos

Más productos listos

Otras soluciones que puede empezar a usar de inmediato, con plataforma probada, instalación incluida y soporte tras el lanzamiento.

Todos